Brought to you by
Brought to you by
This is an old revision of the document!
Many subjective perceptions determine living comfort, even the colour of the surroundings plays a certain role – particularly for the mood of person who thereby expresses his or her perceptions. Living comfort mainly depends on the “thermal comfort”. This has been well-researched and the results have been incorporated into international standards (DIN ISO 7730). A large part of the information available to us today is due to the work of the Danish scientist P. O. Fanger (Wikipedia Seite).
Optimal thermal comfort is established when the heat released by the human body is in equilibrium with its heat production. Fanger's comfort equation is derived from this fact. It creates a relationship between the activity (e.g. sleeping, running…) and clothing as well as the determining factors for the thermal surroundings, which are as follows:
There is a complete range of combinations of these four comfort factors where the level of comfort is very good, this is known as the comfort range. It can be determined by Fanger’s equation, documented in ISO 7730. Furthermore, according to this standard it is essential that
Regarding the last point, P.O. Fanger writes: “the more irregular the thermal field in a room is, the greater the expected number of dissatisfied people.”
It is exciting that by the requirements of the passive house standard all comfort criteria are automatically optimally fulfilled - substantially improving the thermal insulation simultaneously improves thermal comfort. This can be understood as follows:
The practical consequence: With highly insulating external construction components, the temperature of the interior surface is only slightly different from the other temperatures in the area; this applies both in summer and winter. In the winter, the interior surfaces of the external construction components are comfortably warm (external walls, roofs etc. at the most 1 °C under the ambient temperature, window surfaces maximally 3 to 3.5 °C under it [ 1 ]). The definition of “Passive House quality” windows is straightforward: The insulating efficiency of a window suitable for Passive Houses must be so good that under the coldest design conditions, the equation:
θ area - θ Oberfl ≤ 3.5 °C
still holds true. These small temperature differences have the following affects on the comfort criteria:
Because all of the comfort criteria are fulfilled, without the need for a compensatory radiation heating surface, everythere in the Passive House there is “automatically” a radiant heat climate, independently of how the heat is supplied. More still: since there are no large temperature differences, air movement remains small. The results represented here are documented in the publication [ 1 ].
The comfort characteristics of well insulated buildings can be observed in practice and is confirmed by three independent research results:
[ 1 ] Pfluger, R.; Schnieders, J.; Buyer, B.; , W. Feist: Highly insulating window systems: Investigation and optimization in the installation (appendix to interim report A),
[ 2 ] Schnieders, J.; Betschart, W.; , W. protects: Room air currents in the passive house: Measurement and simulation HLH 03-2002, page 61
[ 3 ] Lipp, B. and Moser, M.: Heating systems and comfort: Is comfort physiologically measurable? in: AkkP proceedings NR. 25, Darmstadt, 2004
[ 4 ] Hermelink, Andreas: Do desires become true? Temperatures in passive houses for tenants; in: AkkP proceedings NR. 25, Darmstadt, 2004
To in this connection the question of the importance of the heat capacity is often discussed. Further information on this topic: Daemmen_oder Speichern.HTML.(German)