User Tools

Site Tools


planning:airtight_construction:airtightness_measurement_of_high-rise_buildings_guidelines

Airtightness Measurement of High-Rise Buildings

Due to the particularly strong wind and thermal influences in high-rise buildings, special rules must be taken into account for blower door measurements. The ISO 9972 standard does not provide sufficient information on this. For this reason, the Passive House Institute (PHI) has produced a guide for carrying out airtightness measurements in high-rise buildings. The influence of the temperature difference and the height of the building on the pressure difference between the bottom and the top (thermal) is, for example, about 48 Pa for an 80 m high building and a temperature difference (inside/outside) of 15 K. This means that pressure differences occur. This results in pressure differences that can no longer be neglected for the measurement. This example makes it clear that the requirement of the standard that a deviation of the pressure difference of 10% must not be exceeded anywhere within the building envelope cannot be met under any circumstances. In order to still be able to carry out the measurement in a high-rise building, practical tips for the measurement are derived and presented. It is shown how to proceed, where the fans can be positioned, which measured values cannot be evaluated and which additional measurements should be taken. The measurement error due to the non-linearity of the flow formula is also explained.

The first office tower built to the Passive House standard, in Vienna Passive House Project database ID: 2860

Download the Guide here


Click here to read more about the Airtight construction

Click here to read more about Guides and Aids

planning/airtight_construction/airtightness_measurement_of_high-rise_buildings_guidelines.txt · Last modified: 2022/02/14 14:49 by yaling.hsiao@passiv.de