Passipedia EN

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{ :picopen:diy_hessen_jetzt_anpacken.png?140|}}
====== Insulating an attic staircase ======

In their old, original form, attic staircases which often lead to the loft or roof space in single-family houses cause extremely high heat losses. Usually the door of the hatch is only a few millimetres thick and the construction is often extremely non-airtight in addition, due to which warm air flows out through the edge joint and cold air enters in the winter, usually from leaks located on the ground floor((  One of the reasons for cold air currents at floor level on the ground floor )) . Rigid insulation panels made of various materials can be used for insulating this, the main factor here is how easy it is to cut and handle the panels. Even high performance insulation materials such as phenolic rigid foam panels (thermal conductivity 0.022 W/(mK)) are appropriate here because space for insulation material is usually limited. 

===== Here's how: =====


|<WRAP box 10cm>These extendable staircases either have an end-to-end fixed wooden board or a thinly covered wooden frame. The thickness of this frame and the interior dimensions are initially measured for the first insulation panel. A second insulation panel is later used above this. </WRAP> |{{ :picopen:insulating_an_attic_staircase_0_1.jpg |}}|
|<WRAP box 10cm>Depending on the material, the panels can be cut using a sharp knife or with a hot wire cutting device. </WRAP> |{{ :picopen:insulating_an_attic_staircase_0_2.jpg |}}|
|<WRAP box 10cm>Fitting and insertion of the first insulation panel is really quite easy. Nothing can go wrong here - obviously it is better if the air space is completely filled in. As with other measures which we have described here, any remaining gaps can be filled in with hemp fibre. (Did someone just see the light here? That's probably an energy-efficient LED bulb there).  </WRAP> |{{ :picopen:insulating_an_attic_staircase_0_3.jpg |}}|
|<WRAP box 10cm>To also reduce the escape of warm air, sealing is also applied. The PHI has had particularly good success with lip seals made of rubber or silicone (hollow profile), since these are especially long-lasting/durable. </WRAP> |{{ :picopen:insulating_an_attic_staircase_0_4.jpg |}}|

===== How much does this save? =====


In the example here, almost 80 % heat losses are saved compared to before the measure. That equates to around 15 € each year (at an energy price of 11 cents), without the effect of improved airtightness. The (one-off) material costs are not much higher. 3 hours of DIY work in total by all those involved in making the video. This is definitely worthwhile. 

{{ :picopen:diy_hessen_jetzt_anpacken.png?140|}}The detailed instructions can be downloaded here: **[[https://passipedia.de/_media/baulich/diy-anleitung-dachbodentreppe.pdf|DIY instructions for insulating an attic staircase (German only).]]**

The commissioner for energy saving in Germany has made a YouTube-video on this:

{{youtube>eRJdU80lY38?}}\\ 

By the way, this is in line with our call for action/campaign: **DIY - we can initiate our own energy transition!** 


"Just do it yourself!" 

**[[efficiency_now:building_envelope|Back to overview of "Structural Measures"]]**