planning:refurbishment_with_passive_house_components:building_integrated_photovoltaics_bipv_in_step_by_step_retrofitting_projects

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
planning:refurbishment_with_passive_house_components:building_integrated_photovoltaics_bipv_in_step_by_step_retrofitting_projects [2016/03/10 17:44] kdreimaneplanning:refurbishment_with_passive_house_components:building_integrated_photovoltaics_bipv_in_step_by_step_retrofitting_projects [2019/02/28 10:14] (current) cblagojevic
Line 39: Line 39:
 [{{ :picopen:pv_skylight_san_anton_market_madrid_spain_._source_onyx.png?500 |Figure 4: PV Skylight, San Anton Market (Madrid, Spain). Source ONYX}}] [{{ :picopen:pv_skylight_san_anton_market_madrid_spain_._source_onyx.png?500 |Figure 4: PV Skylight, San Anton Market (Madrid, Spain). Source ONYX}}]
  
-  * ListenpunktInfrared radiation coming from natural sunlight can cause a heat build-up inside building, resulting in thermal imbalance under hot climate conditions. Measurements carried out with a-Si photovoltaic glazing show a significant decrease in radiation transmission of 780nm-2500nm range (near infrared, N-IR), up to 90%.+  * Infrared radiation coming from natural sunlight can cause a heat build-up inside building, resulting in thermal imbalance under hot climate conditions. Measurements carried out with a-Si photovoltaic glazing show a significant decrease in radiation transmission of 780nm-2500nm range (near infrared, N-IR), up to 90%.
  
   * Due to the greenhouse effect, the temperature of the interior rises when the g-value increases. The g-value and SHGC (Solar Heat Gain Coefficient) indicates the amount of energy that goes through a glazing. The a-Si technology of Onyx Solar provides a great protection from such factor, limiting the g-value to the range of 10-40%.   * Due to the greenhouse effect, the temperature of the interior rises when the g-value increases. The g-value and SHGC (Solar Heat Gain Coefficient) indicates the amount of energy that goes through a glazing. The a-Si technology of Onyx Solar provides a great protection from such factor, limiting the g-value to the range of 10-40%.
Line 45: Line 45:
   * Another key factor to consider when choosing the right glazing is the negative impact of ultraviolet (UV) radiation into the interiors, on furnishings, and to people. The architectonic photovoltaic glazing filters up to 99% of the ultraviolet radiation. Regarding the light reflection produced by the photovoltaic glass, values go from 7 to 9%. These values are similar to conventional glazing which normally ranges from 6 to 10%.   * Another key factor to consider when choosing the right glazing is the negative impact of ultraviolet (UV) radiation into the interiors, on furnishings, and to people. The architectonic photovoltaic glazing filters up to 99% of the ultraviolet radiation. Regarding the light reflection produced by the photovoltaic glass, values go from 7 to 9%. These values are similar to conventional glazing which normally ranges from 6 to 10%.
  
-{{  :picopen:solar_transmittance_of_conventional_glass_versus_onyx_solar_a-si_photovoltaic_glass._source_onyx.png?600 |}} +  The semi-transparent a-Si photovoltaic glazing systems provides a complete flexibility in transparency without compromising the capability of the natural sun light diffusing into the interior spaces. Depending on the transparency degree, the light transmission can vary from 10 to 30%, which is normally the optimal range for interior space.
- +
-  ListenpunktThe semi-transparent a-Si photovoltaic glazing systems provides a complete flexibility in transparency without compromising the capability of the natural sun light diffusing into the interior spaces. Depending on the transparency degree, the light transmission can vary from 10 to 30%, which is normally the optimal range for interior space.+
  
   * Double or triple glazing photovoltaic insulating units can also be incorporated into the project providing improved thermal insulation properties, reaching Uvalues of 0,7W/m<sup>2</sup>K. The following table shows some properties of the most common glazing configurations.   * Double or triple glazing photovoltaic insulating units can also be incorporated into the project providing improved thermal insulation properties, reaching Uvalues of 0,7W/m<sup>2</sup>K. The following table shows some properties of the most common glazing configurations.
planning/refurbishment_with_passive_house_components/building_integrated_photovoltaics_bipv_in_step_by_step_retrofitting_projects.txt · Last modified: 2019/02/28 10:14 by cblagojevic