Differences

This shows you the differences between two versions of the page.

--- planning:pressure_loss_calculation_tool [2023/02/17 18:05] – mpatyna
+++ planning:pressure_loss_calculation_tool [2023/02/23 16:35] (current) – mpatyna
@@ Line 1: / Line 1: @@
-======Pressure loss calculation tool======
+======Pressure Loss Calculation Tool======
-This tool is used for the approximate pressure loss calculation of ventilation ducts (round, square) and selected fittings (e.g. bends, tees). It can also be used to take into account other fittings, as long as their pressure loss coefficient is known. The result is the pressure loss of the respective individual component (e.g. pipe section, fitting, filter).
+This tool is used for the approximate pressure loss calculation of ventilation ducts (round, rectangular) and certain fittings (e.g. bends, T-pieces). It can also be used to take into account other fittings, as long as their resistance coefficient is known. The result is the pressure loss of the respective individual component (e.g. pipe section, fitting, filter).
 In order to obtain the total pressure loss for the entire ventilation duct network, the individual results (pressure losses of each segment) must then be summed up in a separate calculation. Please note that in the case of branched ventilation duct networks, the branch with the highest pressure loss is decisive.
@@ Line 13: / Line 13: @@
-Download the tool [[https://database.passivehouse.com/de/download/product_page/druckverlust-lueftung-1-0|here]].
+**Download the tool [[https://database.passivehouse.com/de/download/product_page/druckverlust-lueftung|here]].**