Passipedia EN

User Tools

Site Tools

You are here: Passipedia - The Passive House Resource » Planning and Construction » Non-residential Passive House buildings » Passive House Laboratories
planning:non-residential_passive_house_buildings:laboratories

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
planning:non-residential_passive_house_buildings:laboratories [2022/05/31 13:54] – [The fabric will last longest] wolfgang.hasper@passiv.deplanning:non-residential_passive_house_buildings:laboratories [2022/06/07 16:54] (current) – [Wastewater disinfection] wolfgang.hasper@passiv.de
Line 19: Line 19:
 Laboratories and offices share some other aspects, such as the importance of lighting. The design should balance good daylighting with limiting solar loads in the summer, which will result in moderate openings around 40% of the facade, with external movable shading that still allows daylight in. In many cases this will mean some sort of venetian blinds with daylight-transporting horizontal slats in the top part. Ideally the window openings will have no lintel to allow light to the depth of the room, but a parapet, where glazing will not contribute to daylighting. As glazing is usually the most expensive part of the building fabric this will also optimise building cost. An internal glare screen can help ensure visual comfort for screen work in the winter, when exterior shading is not desired. Laboratories and offices share some other aspects, such as the importance of lighting. The design should balance good daylighting with limiting solar loads in the summer, which will result in moderate openings around 40% of the facade, with external movable shading that still allows daylight in. In many cases this will mean some sort of venetian blinds with daylight-transporting horizontal slats in the top part. Ideally the window openings will have no lintel to allow light to the depth of the room, but a parapet, where glazing will not contribute to daylighting. As glazing is usually the most expensive part of the building fabric this will also optimise building cost. An internal glare screen can help ensure visual comfort for screen work in the winter, when exterior shading is not desired.
  
-Daylight will be complemented with highly efficient, LED lighting with illuminance and presence control. A qualified lighting design will ensure an optimised solution with installed power of less than 1.5 W/(m²*100lx).+Daylight will be complemented with highly efficient, LED lighting with illuminance and presence control. A qualified lighting design will ensure an optimised solution with installed power of less than 1.5 W/(m²*100lx) that limits the high illuminance to the actual workspace.
  
 ===== Airtightness and MVHR ===== ===== Airtightness and MVHR =====
Line 42: Line 42:
 Keep in mind, that all heat recovery systems will have a lower limit for the flow they can handle with good heat recovery rate. Beyond that the flow regime will change to laminar and the heat recovery may plummet. Therefore, if the scale of possible flow scenarios is very wide, a combination of smaller MVHR units may have to be cascaded. The same holds for exhaust air heat pump systems and their compressors. Keep in mind, that all heat recovery systems will have a lower limit for the flow they can handle with good heat recovery rate. Beyond that the flow regime will change to laminar and the heat recovery may plummet. Therefore, if the scale of possible flow scenarios is very wide, a combination of smaller MVHR units may have to be cascaded. The same holds for exhaust air heat pump systems and their compressors.
  
-Flow controllers should network with the MVHR unit for fan control to avoid the inferior constant duct pressure regime for increased efficiency.+Flow controllers should network with the MVHR unit for fan control in order to avoid the inferior //constant duct pressure// regime for increased efficiency.
  
 ==== Ducts ==== ==== Ducts ====
  
-All ducts require a large cross-section in order to limit air speed/pressure loss and save fan power. Any filters and fittings need to be laid out for low pressure loss as well. Ways should be sought to design a compact, short-path duct system without narrow bends- a point where the systems design and the architectural design should be developed in sync.+All ducts require a large cross-section in order to limit air speed/pressure loss and save fan power. Any filters and fittings need to be laid out for low pressure loss as well. Ways should be sought to design a compact, short-path duct system without narrow bends- a point where **the systems design and the architectural design should be developed in sync.**
  
 ===== Load handling ===== ===== Load handling =====
 High air flows offer a high potential to meet comparatively high loads by ventilation air alone. A good fabric will keep the heating load low enough to be manageable with air flows typical for office-like use, but higher loads, particularly in the summer, can be handled by the plant that will usually be designed for higher intensity ventilation. High air flows offer a high potential to meet comparatively high loads by ventilation air alone. A good fabric will keep the heating load low enough to be manageable with air flows typical for office-like use, but higher loads, particularly in the summer, can be handled by the plant that will usually be designed for higher intensity ventilation.
  
-For example, at 8 ACH (as is typical for many lab scenarios) 50 W/m² can be handled by ventilation air alone with a temperature difference of only 6K. This is very heat-pump friendly and facilitates an all-electric building based on renewable energy- which in turn results in a favourable [[https://passipedia.org/playground/per_landing_page|PER]] rating.+For example, at 8 ACH (as is typical for many lab scenarios) 50 W/m² can be handled by ventilation air alone with a temperature difference of only 6K. This is very heat-pump friendly and facilitates an all-electric building based on renewable energy- which in turn results in a favourable [[https://passipedia.org/basics/energy_and_ecology/primary_energy_renewable_per|PER]] rating.
  
 If an exhaust-air heat pump is all it takes for heating and cooling of the space this has a potential for a simple, compact and affordable plant with minimal maintenance. It may take a learning curve for the market though, to supply such systems in a preconfigured, almost off the shelf way as is now (2022) common for boilers and their auxiliaries. If an exhaust-air heat pump is all it takes for heating and cooling of the space this has a potential for a simple, compact and affordable plant with minimal maintenance. It may take a learning curve for the market though, to supply such systems in a preconfigured, almost off the shelf way as is now (2022) common for boilers and their auxiliaries.
  
-While all load handling should be possible by ventilation air alone in most instances, it can be a consideration to also employ [[phi_publications:pb_41:concrete_core_temperature_control_in_passive_houses|concrete core activation]] of the slabs. Then a considerable part of heating and sensible cooling can be handled independent of MVHR operation- a useful option if the MVHR is shut down over night or to boost total capacity in a heat-pump friendly way.+While all load handling should be possible by ventilation air alone in most instances, it can be a consideration to also employ [[phi_publications:pb_41:concrete_core_temperature_control_in_passive_houses|concrete core activation]] of the slabs. Then a considerable part of heating and sensible cooling can be handled independent of MVHR operation- a useful option if the MVHR is shut down over night or to boost total capacity in a heat-pump friendly way. However, in climates with high humidity levels other cooling strategies must be chosen.
  
 ===== Dehumidification ===== ===== Dehumidification =====
  
-In humid areas where dehumidification is required but no ERV is possible due to hazardous extract air, a very efficient dehumidification system for large air flow must be devised. This will- and can without hygienic issues- employ the most efficient heat recovery to reheat the dehumidified air with the heat from the incoming, moist air. The condenser of the dehumidifier in the exhaust air path can be operated in wet mode, after filtering and UV disinfection of the condensed water.+In humid areas where dehumidification is required but no ERV is possible due to hazardous extract air, a very efficient dehumidification system for large air flow must be devised. This will- and can without hygienic issues- employ the most efficient heat recovery to reheat the dehumidified air with the heat from the incoming, moist air. The condenser of the dehumidifier heat pump in the exhaust air path can be operated in wet mode, after filtering and UV disinfection of the condensed water.
  
 ===== Wastewater disinfection ===== ===== Wastewater disinfection =====
-Some biological laboratories may require thermal disinfection of waste water. In a conventional system the water’s high thermal capacity will cause a very high energy demand, and commercial systems already feature some form of heat recovery. However, for disinfection only a high level of temperature is required, not heat. If the heat recovery is sophisticated enough to achieve a high heat recovery rate and heats up the input water with the heat of the water that is simultaneously displaced from the tank and if the system is well insulated, then only a minimal heat loss needs to be covered. A high-temperature heat pump can do the job and transfer heat from the run-off back to the tank.+Some biological laboratories may require thermal disinfection of waste water. In a conventional system the water’s high thermal capacity will cause a very high energy demand, and commercial systems already feature some form of heat recovery. However, for disinfection only a high level of temperature is required, not heat. If the heat recovery is sophisticated enough to achieve a high heat recovery rate and heats up the incoming water with the heat of the water that is simultaneously displaced from the tank and if the system is well insulated, then only a minimal heat loss needs to be covered. A high-temperature heat pump can do the job and transfer heat from the run-off back to the tank.
  
 As commercial units may not be satisfactory, trigger the work on a bespoke system early on. [[planning:non-residential_passive_house_buildings:swimming_pools:energy_efficiency_in_public_indoor_swimming_pools|Indoor swimming pool technology]] has come a long way in heat recovery from waste water in recent years and may offer interesting solutions. As commercial units may not be satisfactory, trigger the work on a bespoke system early on. [[planning:non-residential_passive_house_buildings:swimming_pools:energy_efficiency_in_public_indoor_swimming_pools|Indoor swimming pool technology]] has come a long way in heat recovery from waste water in recent years and may offer interesting solutions.
  
-In cases where exhaust air filtering were demanded, it may be worthwhile to consider extract air filtering and benefit from new options for MVHR under this premise.+In cases where exhaust air filtering were stipulated, it may be worthwhile to consider extract air filtering in the root branch and benefit from more options for MVHR under this premise.
  
 ===== Figures ===== ===== Figures =====
Line 78: Line 78:
 ===== Examples ===== ===== Examples =====
 ==== Large scale: LfL Nossen ==== ==== Large scale: LfL Nossen ====
-Built and pilot-certified by PHI in 2012 for the State of Saxony Agricultural Research Institute. Three structures with 5000m² lab space and 1600m² administration and canteen.+Built and pilot-certified by PHI in 2012 for the State of Saxony Agricultural Research Institute in Nossen/Germany. Three structures with 5000m² lab space and 1600m² administration and canteen.
  
 MVHR with counterflow plate heat recovery was possible due to the nature of the targeted research. Waste water thermal disinfection for part of the lab ([[https://en.wikipedia.org/wiki/EPPO_Code|EPPO]] rules). Load handling over both ventilation air and concrete core activation. Supplied by a combined heat and power system within the building. Due to the low flow temperatures this could easily be replaced with a heat pump. MVHR with counterflow plate heat recovery was possible due to the nature of the targeted research. Waste water thermal disinfection for part of the lab ([[https://en.wikipedia.org/wiki/EPPO_Code|EPPO]] rules). Load handling over both ventilation air and concrete core activation. Supplied by a combined heat and power system within the building. Due to the low flow temperatures this could easily be replaced with a heat pump.
planning/non-residential_passive_house_buildings/laboratories.1653998086.txt.gz · Last modified: 2022/05/31 13:54 by wolfgang.hasper@passiv.de