Differences

This shows you the differences between two versions of the page.

--- planning:building_services:ventilation:comparison_of_energy_performance_of_ventilation_systems_using_passive_vs_active_heat_recovery [2020/08/10 08:12] – [Representation of active heat recovery systems in the PHPP] alang
+++ planning:building_services:ventilation:comparison_of_energy_performance_of_ventilation_systems_using_passive_vs_active_heat_recovery [2020/08/17 10:32] – alang
@@ Line 47: / Line 47: @@
 Figure 1 also shows that the additional electricity demand of a heat pump solution for heat recovery is typically on the order of 10 kWh/(m² yr), a value that is much higher than the total electricity consumption for heating in a Passive House with a heat pump system.
-[{{  :picopen:vent_article_tmikeska_figure_1.png  |**Figure 1: Comparison of final energy use of different investigated systems (including frost protection and energy for fans)**}}]
+[{{  :picopen:vent_article_tmikeska_figure_1.png?800  |**Figure 1: Comparison of final energy use of different investigated systems (including frost protection and energy for fans)**}}]
-[{{  :picopen:vent_article_tmikeska_figure_2.png  |**Figure 2: Comparison of final energy use of different investigated systems shown in %**}}]
+[{{  :picopen:vent_article_tmikeska_figure_2.png?800  |**Figure 2: Comparison of final energy use of different investigated systems shown in %**}}]
 =====Representation of active heat recovery systems in the PHPP=====