Passipedia EN

User Tools

Site Tools

You are here: Passipedia - The Passive House Resource » Planning and Construction » Tools
planning:tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
planning:tools [2023/04/26 18:05] – gergina.radeva@passiv.deplanning:tools [2023/05/11 11:48] (current) – [Additional Tools] mpatyna
Line 9: Line 9:
 |:::|**[[https://passivehouse.com/04_phpp/07_districtph/07_districtph.html|districtPH]]**|districtPH is used to create energy balances for neighborhoods, from smaller groups of buildings up to whole districts.|EN| |:::|**[[https://passivehouse.com/04_phpp/07_districtph/07_districtph.html|districtPH]]**|districtPH is used to create energy balances for neighborhoods, from smaller groups of buildings up to whole districts.|EN|
  
-=====Additional Tools===== +===== Additional Tools ===== 
-^Category^Tools^Description^Languages^ + 
-|**[[Climate|Climate]]**|**[[Climate data tool]]** |With this tool you can retrieve climatic data in the PHPP data format for any location in the world except Antarctica. This data has not been verified and cannot be used for certification purposes.|EN, DE| +^Category^Tools^Description^Languages| 
-|:::|**[[Climate data tool for the Southern Hemisphere]]**|Tool for the adaptation of climate data sets of the Southern Hemisphere to be used in PHPP up to version 9.|EN| +|**[[.:climate|Climate]]** |**[[.:climate_data_tool|]]** |With this tool you can retrieve climatic data in the PHPP data format for any location in the world except Antarctica. This data has not been verified and cannot be used for certification purposes.|EN, DE| 
-|:::|**[[Summer temperature tool]]**|Modification of existing PHPP climate data with higher summer temperatures to allow better evaluation of the summer comfort of buildings.|EN, DE| +| ::: |**[[.:climate_data_tool_for_the_southern_hemisphere|]]** |Tool for the adaptation of climate data sets of the Southern Hemisphere to be used in PHPP up to version 9.|EN| 
-|:::|**[[Climate Conversion PHPP Versions Tool]]**|This tool provides a template in order to automatically convert PHPP climate data between PHPP versions 9 and 10.|EN| +| ::: |**[[.:summer_temperature_tool|]]** |Modification of existing PHPP climate data with higher summer temperatures to allow better evaluation of the summer comfort of buildings.|EN, DE| 
-|:::|**[[Climate Conversion PHPP SI to IP]]**|This tool provides a template in order to automatically convert PHPP climate data from SI to IP units, and vice versa. All cell references and formatting refer to PHPP version 9.|EN| +| ::: |**[[.:climate_conversion_phpp_versions_tool|]]** |This tool provides a template in order to automatically convert PHPP climate data between PHPP versions 9 and 10.|EN| 
-|**[[Thermal envelope|Thermal envelope]]**|**[[Temperature reduction factors for unheated or partially heated extensions]]**|Calculation tool for temperature reduction factors to temperature zone "X" in the PHPP "Areas" worksheet.|EN, DE| +| ::: |**[[.:climate_conversion_phpp_si_to_ip|]]** |This tool provides a template in order to automatically convert PHPP climate data from SI to IP units, and vice versa. All cell references and formatting refer to PHPP version 9.|EN| 
-|:::|**[[planning:tools:manufacturing energy assessment tool]]**| The tool will be new add-on to the Passive House Planning Package (PHPP) and can be used to assess and compare single materials regarding manufacturing energy and CO2, opaque assemblies regarding manufacturing and operational energy as well as CO2.|EN| +|**[[.:thermal_envelope|Thermal envelope]]** |**[[.:temperature_reduction_factors_for_unheated_or_partially_heated_extensions|]]** |Calculation tool for temperature reduction factors to temperature zone "X" in the PHPP "Areas" worksheet.|EN, DE| 
-|**[[Thermal bridges|Thermal bridges]]**|**[[Calculation of heat losses of drain pipes]]**|This tool enables a more accurate calculation of heat losses from internal drain pipes for wastewater and stormwater.|EN, DE| +| ::: |**[[.:tools:manufacturing_energy_assessment_tool|]]** |The tool will be new add-on to the Passive House Planning Package (PHPP) and can be used to assess and compare single materials regarding manufacturing energy and CO2, opaque assemblies regarding manufacturing and operational energy as well as CO2.|EN| 
-|:::|**[[Thermal bridge tool]]**|The user can play with different inputs for standard generic component connections, receiving straightforward feedback, which allows fast optimisation.|EN| +|**[[.:thermal_bridges|Thermal bridges]]** |**[[.:calculation_of_heat_losses_of_drain_pipes|]]** |This tool enables a more accurate calculation of heat losses from internal drain pipes for wastewater and stormwater.|EN, DE| 
-|**[[Windows|Windows]]**|**[[Window tool]]**|The Window tool provides an overview regarding life-cycle costs, hygiene, and comfort for comparison of different windows.|EN| +| ::: |**[[.:thermal_bridge_tool|]]** |The user can play with different inputs for standard generic component connections, receiving straightforward feedback, which allows fast optimisation.|EN| 
-|:::|**[[Hygiene tool]]**|Provides a assessment of the minimum thermal quality of building components with regard to its temperature factor, depending on the relative humidity.|EN| +|**[[.:windows|Windows]]** |**[[.:window_tool|]]** |The Window tool provides an overview regarding life-cycle costs, hygiene, and comfort for comparison of different windows.|EN| 
-|**[[Ventilation|Ventilation]]**|**[[[[planning:commissioning_tool_-_ventilation_checklist|Commissioning tool]]**|The Commissioning tool serves planners and ventilation system installers in how to communicate the correct operational data and how to adequately adjust a ventilation system.|Currently being revised.| +| ::: |**[[.:hygiene_tool|]]** |Provides a assessment of the minimum thermal quality of building components with regard to its temperature factor, depending on the relative humidity.|EN| 
-|:::|**[[Ventilation tool]]**|The tool offers all sorts of information about ventilation units, like performance, dimensions, installation options, to facilitate finding a suitable device for the specific  requirements of the customers specific situation.|EN| +|**[[.:ventilation|Ventilation]]** |**[[.:commissioning_tool_-_ventilation_checklist|]]** |The Commissioning tool serves planners and ventilation system installers in how to communicate the correct operational data and how to adequately adjust a ventilation system.|Currently being revised.| 
-|:::|**[[PHLuft]]**|The PHLuft Tool consists of the three parts: Heat output, Ground heat exchanger, Heat exchanger. The Tool is intended to aid designers of Passive House ventilation systems.|DE| +| ::: |**[[.:ventilation_tool|]]** |The tool offers all sorts of information about ventilation units, like performance, dimensions, installation options, to facilitate finding a suitable device for the specific requirements of the customers specific situation.|EN| 
-|:::|**[[Pressure Loss Calculation Tool]]**|Calculation of pressure losses in ventilation ducts (circular and rectangular).|DE, EN| +| ::: |**[[.:phluft|]]** |The PHLuft Tool consists of the three parts: Heat output, Ground heat exchanger, Heat exchanger. The Tool is intended to aid designers of Passive House ventilation systems.|DE| 
-|:::|**[[PHErde]]**|The tool is intended to serve Passive House designers as an aid for the design and calculation of brine-to-earth heat exchangers.|DE| +| ::: |**[[.:pressure_loss_calculation_tool|]]** |Calculation of pressure losses in ventilation ducts (circular and rectangular).|DE, EN| 
-|**[[Cooling|Cooling]]**|**[[Cooling systems tool]]**|Different cooling configurations can quickly be entered and compared, so that an informed choice of the appropriate system combination is possible.|EN| +| ::: |**[[.:pherde|]]** |The tool is intended to serve Passive House designers as an aid for the design and calculation of brine-to-earth heat exchangers.|DE| 
-|**[[Heat pump|Heat pump]]**|**[[Heat pump tool]]**|Derive COP and EER values to the values needed for PHPP for air-to-air heat pumps.|EN| +|**[[.:cooling|Cooling]]** |**[[.:cooling_systems_tool|]]** |Different cooling configurations can quickly be entered and compared, so that an informed choice of the appropriate system combination is possible.|EN| 
-|:::|**[[planning:tools:Heat pump water heaters|Heat pump water heaters]]**|This tool helps to enter heat pump water heaters inside the thermal envelope into PHPP10.|EN| +|**[[.:heat_pump|Heat pump]]** |**[[.:heat_pump_tool|]]** |It derives the optimal COP (heating) and EER (cooling) test points from the available manufacturer data (e.g. HSPF/SCOP or SEER). The test points can be entered in PHPP.|EN| 
-|**[[Electricity|Electricity]]**|**[[Lift energy demand tool]]**|This tool helps to assess the energy demand of lifts using the Excel®-Tool of the Passive House Institute. The assessment follows the calculations presented in VDI 4707 2009-3. |EN, DE| +| ::: |**[[.:tools:heat_pump_water_heaters|Heat pump water heaters]]** |This tool helps to enter heat pump water heaters inside the thermal envelope into PHPP10.|EN| 
-|**[[Monitoring|Monitoring]]**|**[[Data processing tool]]**|This tool aids in the preparation of measurement data for use in the energy balancing with PHPP|EN, DE| +|**[[.:electricity|Electricity]]** |**[[.:lift_energy_demand_tool|]]** |This tool helps to assess the energy demand of lifts using the Excel®-Tool of the Passive House Institute. The assessment follows the calculations presented in VDI 4707 2009-3.|EN, DE| 
-|:::|**[[Construction site photos list - detailed]]**|The detailed list, can be connected with the PHPP and give you more precise information about the pictures which need to be taken on the building site. A {{ :picopen:building_site_pictures_list_passive_house_building_certification.pdf |Checklist: Building site photos}} is also available|EN| +|**[[.:monitoring|Monitoring]]** |**[[.:data_processing_tool|]]** |This tool aids in the preparation of measurement data for use in the energy balancing with PHPP|EN, DE| 
-|:::|**[[Scaled pointer]]**|The Passive House Institute has designed a scaled pointer for use during building site visits - as a scale and reference within building site photos.|EN| +| ::: |**[[.:construction_site_photos_list_-_detailed|]]** |The detailed list, can be connected with the PHPP and give you more precise information about the pictures which need to be taken on the building site. A {{:picopen:building_site_pictures_list_passive_house_building_certification.pdf|Checklist: Building site photos}}  is also available|EN| 
-|**[[|Others]]**|**[[https://database.passivehouse.com/de/download/product_page/ipconversion| IP Conversion]]**|Conversion of units between the imperial (IP) and metric (SI) system.|EN| +| ::: |**[[.:scaled_pointer|]]** |The Passive House Institute has designed a scaled pointer for use during building site visits - as a scale and reference within building site photos.|EN| 
-|:::|**[[planning:water_vapour|Saturation densities of vapour in air]]**|This tool gives values for the stauration water vapour density dependent on tempearture.|EN, DE| +|**[[.:tools|Others]]** |**[[https://database.passivehouse.com/de/download/product_page/ipconversion|IP Conversion]]** |Conversion of units between the imperial (IP) and metric (SI) system.|EN| 
-|:::|**[[Sound protection – tools and calculations]]**|This tool is intended as aid for approximate calculation and dimensioning of sound protection measures by the designer.|DE|+| ::: |**[[.:water_vapour|Saturation densities of vapour in air]]** |This tool gives values for the stauration water vapour density dependent on tempearture.|EN, DE| 
 +| ::: |**[[.:sound_protection_tools_and_calculations|]]** |This tool is intended as aid for approximate calculation and dimensioning of sound protection measures by the designer.|DE| 
  
planning/tools.txt · Last modified: 2023/05/11 11:48 by mpatyna