planning:refurbishment_with_passive_house_components:thermal_envelope:floor_replacement_svartbaecksvaegen

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
planning:refurbishment_with_passive_house_components:thermal_envelope:floor_replacement_svartbaecksvaegen [2017/12/13 18:05]
kdreimane [Floor Replacement: Svartbäcksvägen]
planning:refurbishment_with_passive_house_components:thermal_envelope:floor_replacement_svartbaecksvaegen [2017/12/13 18:05]
kdreimane [Floor Replacement: Svartbäcksvägen]
Line 12: Line 12:
  
 One of the main challenges when fitting a new ground floor to an existing building is to reduce thermal bridging to an acceptable minimum. This helps to avoid heat loss and condensation (which in turn may damage the building structure and/or cause mould growth). ​ One of the main challenges when fitting a new ground floor to an existing building is to reduce thermal bridging to an acceptable minimum. This helps to avoid heat loss and condensation (which in turn may damage the building structure and/or cause mould growth). ​
-{{:​picopen:​thermal_grapics.png?​550|}}+[{{:​picopen:​thermal_grapics.png?​550|}}]
  
 On the outside, the earth is dug out, new drainage pipes are positioned and the trench is filled with FOAMGLAS® gravel. Insulation boards with draining properties are fitted to the wall. The resulting Ψ–value of the wall/floor connection for the PHPP input is approximately 0.020-0.040W/​(mK) –depending on the actual moisture content of the FOAMGLAS® pebbles. On the outside, the earth is dug out, new drainage pipes are positioned and the trench is filled with FOAMGLAS® gravel. Insulation boards with draining properties are fitted to the wall. The resulting Ψ–value of the wall/floor connection for the PHPP input is approximately 0.020-0.040W/​(mK) –depending on the actual moisture content of the FOAMGLAS® pebbles.
Line 20: Line 20:
  
  
 +
 +----
  
 |//The sole responsibility for the content of Passipedia lies with the authors. \\ |//The sole responsibility for the content of Passipedia lies with the authors. \\
 While certain marked articles have been created with the support of the EU, they do not necessarily reflect the opinion of the European Union; \\ While certain marked articles have been created with the support of the EU, they do not necessarily reflect the opinion of the European Union; \\
 Neither the EACI nor the European Commission are responsible for any use that may be made of the information contained therein.//| \\ Neither the EACI nor the European Commission are responsible for any use that may be made of the information contained therein.//| \\
planning/refurbishment_with_passive_house_components/thermal_envelope/floor_replacement_svartbaecksvaegen.txt · Last modified: 2017/12/13 18:05 by kdreimane