Differences

This shows you the differences between two versions of the page.

--- planning:calculating_energy_efficiency [2020/08/05 12:48] – [Precise model: dynamic simulation] wfeist
+++ planning:calculating_energy_efficiency [2020/08/05 12:48] (current) – [Precise model: dynamic simulation] wfeist
@@ Line 16: / Line 16: @@
 \\
 |{{ :picopen:meassim_wall.png }}|
-|//**Figure 1: \\ Comparison between measurement and simulation results in \\ the Darmstadt Kranichstein Passive House project. \\ Note that there are deviations - mainly due to \\ limited resources in the accuracy and number \\ of sensors used during the monitoring. \\ (longwave radiation could only be measured on the horizontal plane)**\\ \\ Simulation programme used: DYNBIL; see [[planning:calculating energy efficiency:Dynamic simulation]]; \\ Published in [AkkP 5]//|\\
+|//**Figure 1: \\ Comparison between measurement and simulation results in the Darmstadt Kranichstein Passive House project. Note that there are deviations - mainly due to limited resources in the accuracy and number of sensors used during the monitoring. (longwave radiation could only be measured on the horizontal plane)**\\ \\ Simulation programme used: DYNBIL; see [[planning:calculating energy efficiency:Dynamic simulation]]; \\ Published in [AkkP 5]//|\\
 \\