User Tools

Site Tools


planning:calculating_energy_efficiency:energy_balances_-_background

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
planning:calculating_energy_efficiency:energy_balances_-_background [2018/06/22 12:45] – [See also] cblagojevicplanning:calculating_energy_efficiency:energy_balances_-_background [2020/08/03 14:57] (current) – [Discussion about the purpose of heating] wfeist
Line 46: Line 46:
   - There are often critical remarks about the the calculation method too:\\ ** Can (stationary) U-values be used in calculations at all?  Isn't the heat storage more important than the thermal insulation, and isn't the whole U-value calculation method incorrect?**\\ No, the U-value calculation method is the correct approach as has been shown by many systematic analyses (see [[planning:thermal_protection:thermal_protection_works:Thermal protection vs. thermal storage]]). The comparison of the energy balance after the calculation and after the measurement additionally proves this.\\   - There are often critical remarks about the the calculation method too:\\ ** Can (stationary) U-values be used in calculations at all?  Isn't the heat storage more important than the thermal insulation, and isn't the whole U-value calculation method incorrect?**\\ No, the U-value calculation method is the correct approach as has been shown by many systematic analyses (see [[planning:thermal_protection:thermal_protection_works:Thermal protection vs. thermal storage]]). The comparison of the energy balance after the calculation and after the measurement additionally proves this.\\
 \\ \\
 +==== Can a similar approach also be used to calculate the cooling demand? ====
 +
 +Yes, it can. It is exactely the same balance - the utilisation factor will now be applied to potentially remaining heat losses. This is implemented as the active cooling sheet in PHPP.\\
 +
 +It is also possible, to give an assessment of the thermal comfort if no active cooling is available: The is based on the [[:a_simplified_method_for_determining_thermal_comfort_in_summer_for_buildings_without_active_cooling|passive cooling sheet]].
 +  
 +\\ \\
 ===== Reference area: Treated Floor Area ===== ===== Reference area: Treated Floor Area =====
  
Line 75: Line 82:
 === Calculating the Treated Floor Area (TFA) === === Calculating the Treated Floor Area (TFA) ===
 ---- ----
-Here you will find detailed information on how to [[planning:calculating_energy_efficiency:energy_balances_-_background:calculating_the_Treated_Floor_Area| calculate the Treated Floor Area for PHPP calculations]].+Here you will find detailed information on how to [[planning:calculating_energy_efficiency:energy_balances_-_background:calculating_the_Treated_Floor_Area| calculate the Treated Floor Area for PHPP calculations]].  {{:picopen:members_only.png?25|}}
  
 \\ \\
planning/calculating_energy_efficiency/energy_balances_-_background.1529664343.txt.gz · Last modified: 2018/06/22 12:45 by cblagojevic