Differences

This shows you the differences between two versions of the page.

--- efficiency_now:building_envelope:straw_as_insulation_material [2023/08/07 15:11] – [Straw as insulation material] yaling.hsiao@passiv.de
+++ efficiency_now:building_envelope:straw_as_insulation_material [2023/08/07 16:11] (current) – yaling.hsiao@passiv.de
@@ Line 10: / Line 10: @@
-Best: Bales on edge or upright. Here, the thermal flux is perpendicular to the direction of the straw stalks, called ‘on edge’ or ‘upright’, see figure 2; the thickness of insulation is in this case 36 cm. Taking into account a wooden frame construction with 6 cm posts at 1 m centres, with clay plaster on the inside and lime plaster on the outside, the U-value of the wall will be 0.15 W/(m²K) at an overall thickness of 42 cm. With bales laid flat, resulting in 48 cm insulation thickness and 54 cm overall thickness (λR = 0.080 W/(mK)), the Uvalue is 0.17 W/(m²K). So, bales on edge are preferable regarding the Uvalue, as well as the space required for construction.
+**Best: Bales on edge or upright.** Here, the thermal flux is perpendicular to the direction of the straw stalks, called ‘on edge’ or ‘upright’, see figure 2; the thickness of insulation is in this case 36 cm. Taking into account a wooden frame construction with 6 cm posts at 1 m centres, with clay plaster on the inside and lime plaster on the outside, the U-value of the wall will be 0.15 W/(m²K) at an overall thickness of 42 cm. With bales laid flat, resulting in 48 cm insulation thickness and 54 cm overall thickness (λR = 0.080 W/(mK)), the Uvalue is 0.17 W/(m²K). So, bales on edge are preferable regarding the Uvalue, as well as the space required for construction.
-[{{.:stroh_als_waermedaemmung_.png?200 |**Figure 2**: Bale orientation © PHI }}]
+[{{:picopen:stroh_als_waermedaemmung_.png?200 |**Figure 2**: Bale orientation © PHI }}]
 **Checklist for straw bales.** The following characteristics should be assessed for construction bales: