User Tools

Site Tools


basics:building_physics_-_basics:what_defines_thermal_bridge_free_design

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
basics:building_physics_-_basics:what_defines_thermal_bridge_free_design [2022/01/18 15:13]
yaling.hsiao@passiv.de [References]
basics:building_physics_-_basics:what_defines_thermal_bridge_free_design [2022/02/15 19:13] (current)
admin
Line 8: Line 8:
  
 <WRAP centeralign > <WRAP centeralign >
-<latex>+$$
 \Large{H_{T} = \sum_{i}A_{i}U_{i}+\sum_{k}l_{k}\varPsi_{k}+\sum_{j}\chi_{j}} \Large{H_{T} = \sum_{i}A_{i}U_{i}+\sum_{k}l_{k}\varPsi_{k}+\sum_{j}\chi_{j}}
-</latex>+$$
 </WRAP> </WRAP>
  
  “Thermal bridge free design” can be defined as follows: the contributions provided by thermal bridging are smaller than or equal to zero:   “Thermal bridge free design” can be defined as follows: the contributions provided by thermal bridging are smaller than or equal to zero: 
 <WRAP centeralign  box round > <WRAP centeralign  box round >
-<latex>+$$
 \Large{\sum\varPsi \cdot l + \sum\chi  \leq 0} \Large{\sum\varPsi \cdot l + \sum\chi  \leq 0}
-</latex>\\+$$\\
 \\ \\
 \\ \\
Line 30: Line 30:
 Verification using this definition of thermal bridge free design would imply that all details would have to be calculated in a multi-dimensional way. Therefore, simplified criteria for “thermal bridge free design” should be devised. It was found that for ordinary building geometries, the “thermal bridge free” requirement was almost always adequately met for all linear disturbances only if  Verification using this definition of thermal bridge free design would imply that all details would have to be calculated in a multi-dimensional way. Therefore, simplified criteria for “thermal bridge free design” should be devised. It was found that for ordinary building geometries, the “thermal bridge free” requirement was almost always adequately met for all linear disturbances only if 
 <WRAP centeralign  box round > <WRAP centeralign  box round >
-<latex>+$$
 \Large{\varPsi \leq 0.01 \quad W/(mK)}  \Large{\varPsi \leq 0.01 \quad W/(mK)} 
-</latex>+$$
 \\ \\
 **[TbCrit]** **[TbCrit]**
basics/building_physics_-_basics/what_defines_thermal_bridge_free_design.txt · Last modified: 2022/02/15 19:13 by admin