Differences

This shows you the differences between two versions of the page.

--- basics:building_physics_-_basics:thermal_transmittance [2022/11/09 09:27] – [The heat flow is (usually quite) proportional to the difference in the temperatures] mmursi
+++ basics:building_physics_-_basics:thermal_transmittance [2022/11/09 09:28] – [The heat flow is (usually quite) proportional to the difference in the temperatures] mmursi
@@ Line 36: / Line 36: @@
 Insulated 17 cm timber construction board with 6 cm vacuum insulation (prefabricated) 	0.076 	With 23 cm in total, this is thinner than the older "thin walls". It is worthwhile even if the building plot is very expensive ((This is the thinnest wall with paradoxically phenomenal thermal protection at the same time. "No space" is not an argument for poor insulation!)). \\
-[[Continue to section on basics:building_physics_-_basics:building_physics_-_heat:thermal_conductivity|thermal conductivity 🌡️]] \\
+[[basics:building_physics_-_basics:building_physics_-_heat:thermal_conductivity|Continue to section on  thermal conductivity 🌡️]] \\
-[[Continue to section on calculation of basics:building_physics_-_basics:building_physics_-_heat:u-values_build-up|U-values of multi-layer build-ups 🌡️]]\\
+[[basics:building_physics_-_basics:building_physics_-_heat:u-values_build-up|Continue to section on calculation of U-values of multi-layer build-ups 🌡️]]\\
-[[Back to the basics:building_physics_-_basics:building_physics_-_heat|Building Physics Basics Course - Heat - Overview 🌡️]]\\
+[[basics:building_physics_-_basics:building_physics_-_heat|Back to the Building Physics Basics Course - Heat - Overview 🌡️]]\\