Differences

This shows you the differences between two versions of the page.

--- basics:building_physics_-_basics:thermal_bridges:tbcalculation:examples:iwfs [2018/10/02 11:57] – cblagojevic
+++ basics:building_physics_-_basics:thermal_bridges:tbcalculation:examples:iwfs [2021/06/21 09:19] (current) – [Interior walls on floor slabs] nsukhija
@@ Line 5: / Line 5: @@
 [{{ :picopen:innenwand_auf_bodenplatte_abb_1.png?600 |Figure 1: Thermal bridge dependent on the distance from the floor slab edge}}]
-In the case of a specific building the position of the interior wall is known. The Ψ-value can then be calculated based on the same method as in the [[basics:building_physics_-_basics:heat_transfer: what_defines_thermal_bridge_free_design:thermal_bridge_calculation:Examples:EWFS|section on  "Exterior wall on floor slab"]]. For this, first a conductance without taking the interior wall into account is determined and then the conductance with the interior wall taken into account at the corresponding point. However, this requires a three-dimensional calculation which will be too time-consuming in most cases.
+In the case of a specific building the position of the interior wall is known. The Ψ-value can then be calculated based on the same method as in the [[basics:building_physics_-_basics:thermal_bridges:tbcalculation:examples:ewfs|section on  "Exterior wall on floor slab"]]. For this, first a conductance without taking the interior wall into account is determined and then the conductance with the interior wall taken into account at the corresponding point. However, this requires a three-dimensional calculation which will be too time-consuming in most cases.
 As a two-dimensional approximation, which is also used in the context of certification for a construction system, it is recommended that the ground is taken into account and the distance of the interior wall from the floor slab edge assumed to be 1.5 metres. This procedure is demonstrated below using an example.
@@ Line 19: / Line 19: @@
 ===== See also =====
-  * [[basics:building_physics_-_basics:heat_transfer:thermal_bridges:thermal_ bridge_calculation|Thermal bridge calculation]]
+  * [[basics:building_physics_-_basics:thermal_bridges:tbcalculation:basic_principle_for_calculating_thermal_bridges|Thermal bridge calculation]]
-  * [[basics:building_physics_-_basics:heat_transfer:what_defines_thermal_bridge_free_design:thermal bridges:thermal_bridge_calculation:recommended procedure]]
+  * [[basics:building_physics_-_basics:what_defines_thermal_bridge_free_design]]
-  * [[basics:building_physics_-_basics:heat_transfer:thermal_bridges:thermal_bridge_calculation:examples]]
+  * [[basics:building_physics_-_basics:thermal_bridges:tbcalculation:examples]]